There is not enough space left on the diskette. The system board comes with the retention module base already installed. To prevent improper floppy cable installation, the shrouded floppy disk header has a keying mechanism. Prices and specifications are subject to change without notice. You will once again see the initial diagnostics on the screen.

Uploader: Akibar
Date Added: 23 May 2005
File Size: 43.4 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 43084
Price: Free* [*Free Regsitration Required]

The diskette may be write-protected. Refer to chapter 1 System Memory section for detailed specification of the memory supported by the system board.

DFI P-AL – motherboard – ATX – Socket – iP Overview – CNET

This was found in their archive section. The monitor has lost its vertical sync. Sector This field displays the number sectors per track. Make sure soknd 1 of the cable connector is aligned with pin 1 of J1. Unlock the socket by pushing the lever sideways, away from the socket, then lifting it up to a 90o angle. Please make sure they are properly inserted into their corresponding socket.

Your answer needs to include more details to help people.

DFI 848P-AL Manuals

However, if your hard drive has a large capacity, it will take a longer time to format. You must press the Power button to power-on the system. This is recommended when you encounter transmission problem with your device.


For more information on Hyper-Threading Technology, go to: The power switch of each peripheral device is turned on. It covers some very technical items and it is strongly recommended that only experienced skund should make any changes to the default settings.

Any add-in board you have installed is designed ssound your system and is set up correctly. In the actual CMOS setup, you have to use the scroll bar to view the fields.

These apply to a standard specification and will depend on the type and speed of your device.

Once the CPU is in place, push down the lever to lock the socket. DPMS Initializes display power management signaling.

Ask a Question Usually answered in minutes! For better rfi of data, your IrDA peripheral device must be within a 30o angle and within a distance of 1 meter. TigerDirect Business is not responsible for typographical or photographic errors.

You will not be able to push the lever down if the direction is incorrect.

Dfi P-AL Manuals

The processor shown under Computer should resemble the 848p-ao shown below. After the memory test, the following message will appear on the screen: Install the card-edge bracket to the system chassis then insert the connector that is attached to the USB port cables to J8 or J AC Power Failure Recovery When power returns after an AC power failure, you may choose to either power-on the system manually, let the system power-on automatically or return to the state where you left off before power failure occurs.


The larger the range of the Cache RAM, the higher the efficiency of the system. The DMI pool data is then verified or updated whenever the system hardware or setup is altered.

The modifications you have made will be written into the CMOS memory, and the system will reboot. The email address entered is already associated to an account.

Make sure there are no objects resting on the keyboard and that no keys are pressed during the booting process. Check that one end of the AC power cord is plugged into soubd live outlet and the other end properly plugged into the back of the system.

The Control Panel dialog box will appear.