Do not route card cables over or behind the cards. When installing the processor, do not touch any of the pins inside the socket or allow any objects to fall onto the pins in the socket. If you are installing a PCI Express x16 card, the card may cover the floppy-drive connectors. Despite having a plastic shield, the heat-sink assembly may be very hot during normal operation. Snap the bracket onto the new drive. Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. See the label on the module to determine the module’s capacity.
|Date Added:||22 April 2013|
|File Size:||28.75 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
To guard against electrical pc, always unplug your computer from the electrical outlet before removing the cover. Despite having a plastic shield, the heat-sink assembly may be very hot during normal operation. You can do so by touching an unpainted metal surface on the computer chassis.
Certain components within the computer require address space in the 4-GB range. Media Card Reader Optional.
The brackets also keep dust and dirt out of your computer. If you are installing a PCI Express x16 card, the card may cover the floppy-drive connectors. If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure. Use the pull-tab to remove the data cable from your hard drive or from the system board.
While you work, periodically touch an unpainted metal surface to dissipate any static electricity that could harm internal components. If you are installing a processor upgrade kit from Dell, dmension the original heat-sink assembly.
If the new floppy drive does not include shoulder screws, use the screws within the drive panel insert. Remove the card before connecting the floppy-drive cables. If your replacement hard drive does not have the hard drive bracket attached, remove the bracket from the old drive by unsnapping it eimension the drive.
If the card is not removed correctly, the system board may be damaged. Always install DDR2 memory modules in the order indicated on the system board. DDR2 memory modules should be installed in pairs of matched memory size, speed, and technology. If you are not installing a processor upgrade kit from Dell, reuse the original heat-sink assembly when you install your new processor. If possible, pcl not pair an original memory module with a new memory module.
Specifications: Dell Dimension /E Service Manual
Otherwise, your computer may not start properly. If you are installing a new drive, you need to remove the drive-panel insert.
If necessary, disconnect any cables connected to the card. Gently pull the securing tab, grasp the card by its top corners, and then ease it out of its connector. To avoid damage, ensure that the processor aligns properly with the socket, and do not use excessive force when you install the processor.
If the module is difficult to remove, gently ease the module back and forth to remove it from the connector. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. Most interface connectors are keyed for correct insertion; that is, a notch or a missing pin on one connector matches a tab or a filled-in hole on the other connector. To avoid damage to the drive, do not set it on a hard e501.
Do not set the heat-sink assembly upright or touch the thermal interface, as this may result in damage to the thermal interface dimfnsion. If you installed a processor replacement kit from Dell, return the original heat-sink assembly and processor to Dell in the same package in which your replacement kit was sent. Grasp the card by its top corners, and ease it out eell its connector.
Ensure that you release the securing tab to unseat the card. Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer.
Ground yourself by touching an unpainted metal surface on the back of the computer. Some network adapters automatically start the computer when they are connected to a network. Snap the bracket onto the new drive. Leave the release lever extended in the release position so that the socket is ready for dimehsion new processor.