ABIT KN9 SLI NETWORK DRIVER DOWNLOAD

Attach either end of the signal cable to the SATA connector on motherboard. This connector provides an auxiliary power source for devices added on PCI Express slots. Is the motherboard dead? If not, browse the. Click on this tab to enter the menu for installing utilities exclusively developed by ABIT.

Uploader: Dairamar
Date Added: 1 March 2006
File Size: 47.37 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 91813
Price: Free* [*Free Regsitration Required]

Auxiliary 12V Power Connector: The system will not start without connecting power to this one.

The red line on the ribbon cable must be aligned with pin-1 on both the IDE port and the hard-drive connector. Got it, continue to print.

ABIT KN9 SLI – motherboard – ATX – Socket AM2 – nForce 570 SLI

Type in the model name and abt number of your motherboard. The auto-run screen will appear, click the. Don’t show me this message again.

Secure the SLI bracket and the graphics cards to the chassis with screws. Kn9 ultraKn9s. After you had gone through the troubleshooting procedures, yet the netwoork still exists, or you find an evident damage on the motherboard. By pressing ‘print’ button you will print only current page. Insert the SLI bracket into the bracket slot between the graphics cards.

  MSI MS-1222 CAMERA DRIVER DOWNLOAD

ABIT KN9 SLI – motherboard – ATX – Socket AM2 – nForce SLI Overview – CNET

Type in the BIOS version of your motherboard. Set the CPU operating speed back to its default or an appropriate value.

If the situation remains the same, try Step 3. Attach either end of the signal cable to the SATA connector on motherboard. Hardware Setup After doing this to all the slots, you can slide the board into position aligned with slots. Connects to Local Area Network. Page of 48 Go. Before starting these procedures, ensure that you are discharged of static electricity by touching a grounded metal object briefly.

If not, browse the. The heatsink for CPU may have thermal interface material attached bottom. Press the power-on button to boot up system. Usually there is no hardware or BIOS setup requires after adding or removing memory modules, but you will have to clear abi CMOS memory first if any memory module related problem abot. This connector provides an auxiliary power source for devices added on PCI Express slots.

  ARRIS 450B DRIVER

After doing this to all the slots, you can slide the board into nstwork aligned with slots. Please contact our RMA center. After the board has been positioned, check to make sure everything is OK before putting the chassis back on. These indicators work as a reminding device to display the power status of this motherboard with power source connected. This option protects the BIOS configuration or restricts access to the computer itself.

Comments to this Manuals Your Name. The BIOS setup screens and descriptions illustrated in this manual are for your reference only, and may not completely match with what you see netwok your screen. Page 22 DIMM module. To connect SATA device: This connector supplies power to CPU.

If not, applying a few squeeze of thermal paste to the CPU die will help to increase the contact.